Homebrew: What Caused Cloudy Gear
We promise that the products we serve are 100% as we said. If you think it is troublesome to home brew, we can also do this for you, cooked well, and provide the filters, the only step left for you is to filter them.
Want to know details, pls do not hesitate to contact us.
Whatsapp:+8618872220826
email: selina@ycgmp.com
There are some brewers, especially new home brewers get the cloudy gear after finishing all the process. First they get the clear steroid gear, but after set up for a while, the gear turned cloudy. This mostly happened on Tren ace,test E , test cyp, sustanon.
The cloudy gear make brewers confused. Some people doubt that the raw powder they get is pure quality. But is that true ? Of course not all the steroid raw powder from different suppliers are in good quality, sure low quality raws could be the reason. However, are there any other reasons cause the problem ? And when issue like that happened, can the cloudy oil still ok to be used ? or what we can do to make the oil clear ?
Recently, one customer who has been order from us for four years also met this problem, the cloudy gear never met before. Although he trust us, but he tried before contact us, no solution found, so he tested the raw powder, the results showed top quality. Then he contact us for help, then the cloudy gear was caused by the filter he used. So here I list some reasons that caused cloudy gear. Hope it will be helpful for you.
What caused cloudy steroid gear
1.Water mixed with the ingrediants from using a water bath to heat during the brewing process might cause cloudiness.
2.Part of the hormone doesn’t dissolve totally.That’s why stir is necessary while brewing.
3.Issue of the ratio of BA / BB ,the scale do not work well ,this can’t be ignored.Though these might be rarely happen ,but it is possible .Since we are human ,and human make mistake.
4.Low room temperature or big temperature difference soon after brewing it.Do not put the oil you just brewed in the fridge .Let it set in room temperature for at lest 24 hours.
5.the quality of the filter that used. Some filter would be partially dissolve with BA/BB and when it mixed with the oil ,it cause cloudiness .And it couldn’t be resolved by heating.
2.Part of the hormone doesn’t dissolve totally.That’s why stir is necessary while brewing.
3.Issue of the ratio of BA / BB ,the scale do not work well ,this can’t be ignored.Though these might be rarely happen ,but it is possible .Since we are human ,and human make mistake.
4.Low room temperature or big temperature difference soon after brewing it.Do not put the oil you just brewed in the fridge .Let it set in room temperature for at lest 24 hours.
5.the quality of the filter that used. Some filter would be partially dissolve with BA/BB and when it mixed with the oil ,it cause cloudiness .And it couldn’t be resolved by heating.
How to avoid cloudy gear
1.Keep the temperature stable ,especially for fresh made batches.Use good quality filter. Be more careful if you use water batch brewing method.
2.Heat the products a little ,sometimes it turns clear.Even it turns cloudy again ,it means the oil is good and can be used.
3.Reheat it to a temperature about 200f, hold this temperature for 10-15 minutes stirring gently. This method would be useful if cloudiness cause by the stream.
4.Add a tiny EO if cloudiness caused by partial undissolved hormones.
